Technical Specifications
Pre-Filter (Primary Filter)
- Filter Casing‐ S.S.304/316 flange type.
- Efficiency – 90% down to 10 microns (EU‐4 Rating.)
- Media – Three layers of High Density Polyethylene Mesh along with AL. wire mesh.
Intermediate Filter (Secondary Filter)
- Filter Casing – S.S.304/316 flange type.
- Efficiency – 95% down to 5 microns (EU‐7 Rating.)
- Media – Non-woven synthetic media sandwiched between two layers of HDPE mesh.
Exhaust Filter:
- Filter Casing‐Aluminum factory extruded section.
- Efficiency – (99.997% down to 0.3 micron)
- Media – Micro fiberglass paper media (Imported) pleated along with Hot Melt Glue.
Blower Motor Assembly:
- Electric Motor‐Compton / Shanty make, double ended shaft, Single phase, 240 volts, 50Hz.
- Impellers – Aluminum, statically & dynamically balanced, forward curve type.
- Blower casings – FRP, centrifugal type with spring suspension.
Electricals:
- Feather touch ON/OFF switches for b/w motor, tube light, UV light & aux. socket with light indication.
- 40w, Fluorescent light with milky diffuser.
- 6/16 Amps, Aux. socket with s.s.cover plate.
- 16 Amps. Three‐pin top along with connection cable
ART STEEL company manufacturers of sampling, dispensing booth and pharmaceutical filters for providing highest level of protected to airbornes contaminant generating duration for powders handling operation like sampling and dispensing booths.
We are provide operator protections like sampling, dispensing booth and pharmaceutical filters.
Laminar wind stream workstation is appropriate for administering of powders and chemicals material and to limit the danger of polluting to work area for guarantee wellbeing security for individual working with chemical/powder. We are manufacturers, suppliers and exporters of sampling booth and pharmaceuticals filters in Mumbai India to worldwide.
This hardware depends on the distribution of air and guarantees to the clouds shaped for the materials administered, has sucked in a characteristic example of development and captured through pre-sifted. The airflows are then provided to the work area for HEPA, following introductory cycles, we accomplish class 100 hazards evidence laminar development and treatment of materials.
- Class 100 Compatible
- Triple Phase Filtrations
- EU4-Prefilters (95% downs to 5 microns)
- EU7-Intermediate Filter (94% less to 6 microns)
- EU13- HEPA Filters-Supplying/Exhaust (99.995% to 0.5 microns)
- ART STEEL make Differential Pressure Gauge for HEPA filter.
- ON/OFF Switches
- Clean Down Timer with Operation HOLD indicator
- 5/15 Amp Switch Socket for external equipment
Operating Condition:
- Air Velocity: 0.46+_ 0.04mps
- Air Flow: Vertical – Re-circulatory
- Vibrations Levels: Minimums
- Light Intensity: > 300 lux
- POWERS SUPPLIER: 230Volts AC 1-0 50 HZ